home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Light ROM 4
/
Light ROM 4 - Disc 1.iso
/
text
/
maillist
/
1995
/
1095.doc
/
000085_owner-lightwav…mail.webcom.com_Mon Oct 2 16:17:49 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-11-07
|
2KB
Received: by mail.webcom.com
(1.37.109.15/16.2) id AA027315869; Mon, 2 Oct 1995 16:17:49 -0700
Return-Path: <owner-lightwave@mail.webcom.com>
Received: from earth.usa.net by mail.webcom.com with ESMTP
(1.37.109.15/16.2) id AA026815842; Mon, 2 Oct 1995 16:17:23 -0700
Received: (from jgjones@localhost) by earth.usa.net (8.6.10/8.6.10) id RAA26952 for lightwave@mail.webcom.com; Mon, 2 Oct 1995 17:00:35 -0600
Date: Mon, 2 Oct 1995 17:00:35 -0600
From: James Jones/Nibbles and Bits <jgjones@usa.net>
Reply-To: James Jones/Nibbles and Bits <jgjones@usa.net>
Message-Id: <199510022300.RAA26952@earth.usa.net>
To: lightwave@mail.webcom.com
Content-Type: text
Content-Length: 1121
Sender: owner-lightwave@mail.webcom.com
Precedence: bulk
Subject: Hummer.lws
Johnc@mt-inc.com said:
>I've been experimenting with some of the sample scenes that come with
>Lightwave 4.0 final CD. I rendered the Hummer.lws scene, and found that
>the
>ground stops moving at frame 210 or so, so the motion effect is ruined on
>the last 390 frames.
>
>I just figured I'd tweak it and re-set a couple of key-frames, and render
>it again. I'll be darned if I can figure out how the motion is being
>applied to the ground, though....
"NullObject (1)" is controlling all the motion. It's moving the
vehicle, the camera, and the tire tracks. The ground is stationary.
Make a new motion keyframe for NullObject (1) for frame 600 with
a value of Z = 134.00. (That will extend the motion out at the same
speed.)
Unless there's something else dependent on everything stopping at
210, it should render OK.
Weird that the forward motion stops at 210... yet the wheels are
still spinning. Dem' HMMVs are supposed to have 4-wheel drive... :)
-Jim
James G. Jones
Nibbles & Bits
jgjones@usa.net
___
* UniQWK #5134*
--
James Jones/Nibbles and Bits <jgjones@usa.net> sent this message.
To Post a Message : lightwave@webcom.com
Un/Subscription Requests To : lightwave-request@webcom.com
(DIGEST) or : lightwave-digest-request@webcom.com
Administrative Items To : owner-lightwave@webcom.com